Flashings & Accessories – Barrett Company

Terra-EDGE™ Boxes

jason.pribble@keenebuilding.com — Fri, 17 Apr 2026 20:53:40 +0000

Roofscape® Edge is designed as a definite boundary between gravel/paver and growth media for semi-intensive vegetated roofs that allows the flow of water but not of the substrate.

USES:

Semi-intensive vegetated roofs

FEATURES:

Utilizes a “smooth slide” design to make secure, invisible connections
Has prefabricated corners for ease of installation.
Prevents overly moist media conditions around the perimeter or in transition areas of the roof, thus preventing anaerobic growing conditions.

Neoprene Pipe Boots

Beau Kuhn — Mon, 02 Nov 2020 17:26:57 +0000

Barrett Neoprene Pipe Boots offer an economical flashing designed for both Ram-Tough 250 and KLB 100 roofing and and waterproofing systems These units will accommodate pipe sizes: 1″ through 6″ with a Medium Pipe Boot and 8″ through 12″ with a Large Pipe Boot. The conically shaped steps of the Barrett pipe flashing will securely seal all pipes, and the large, double-thick molded rib at the top of each step offers supreme tear resistance and reinforcement, as well as a convenient cutting guide. Utilizing Barrett Pipe Boot Flashings eliminate the workmanship error in field fabrication and makes flashing pipes a clean, consistent process.

*Adapters available for round, square tube, and angle iron available to fit most pipe boots.

MEDIUM BOOTS = 1″, 2″, 3″, 4″, 5″, 6″ pipes

LARGE BOOTS = 8″, 9″, 10″, 11″, 12″ pipes

FEATURES & BENEFITS:

• Neoprene formulation is ideally suited for use with hot applied rubberized asphalt.

• No special tools are needed for installation

• Each boot can be adapted to several pipe sizes

• Years of field experience assure proven performance

• Ease of installation keep installation cost low

• Boots that fit various size pipes makes ordering and inventory easier

PACKAGING:

Packaging and shipping based on customer requirements.

Squeegees

jpb@keenebuilding.com — Tue, 15 Sep 2020 18:27:42 +0000

Wood & Steel-Handled Squeegees

SIZES:

6″ (Steel-Handled)
10″ (Steel-Handled)
12″ (Steel-Handled)
10″ (Wood-Handled)
18″ (Wood-Handled)

TB 50

jpb@keenebuilding.com — Tue, 15 Sep 2020 15:29:33 +0000

TB 50 is a channel termination bar used for edge or vertical parapet wall terminations. Each TB 50 termination bar is 1″ wide and 10′ long and is compatible with all flashings.

DIMENSIONS:

– 26 ga. x 1”x 10’ long

– 1/4” holes spaced 8” on center

AVAILABLE FINISHES:

– Type 304 stainless steel

– Aluminum

TB 75

jpb@keenebuilding.com — Tue, 15 Sep 2020 15:23:56 +0000

TB 75 is a termination bar used at top of flashing to secure it to the backup. Additionally, it has a 3/8″ flange on top for easy caulking. TB 75 is compatible with all flashings.

DIMENSIONS:

– 26 ga. x 1-1/2”x 8’ long

– 1/4” holes spaced 8” on center

– 3/8” flange on top for easy caulking

AVAILABLE FINISHES:

– Type 304 stainless steel

– Aluminum

TB 125

jpb@keenebuilding.com — Tue, 15 Sep 2020 15:17:01 +0000

TB 125 is a flat termination bar used at top of flashing to secure it to the backup. TB 125 is compatible with all flashings.

DIMENSIONS:

– 1/8” x 1” x 8’ long

– 1/4” holes spaced 8” on center

AVAILABLE FINISHES:

– Type 304 stainless steel

– Aluminum

Black Pearl® Butyl Tape

jen@keenebuilding.com — Wed, 17 Jun 2020 20:19:54 +0000

Black Pearl ® Butyl Tape compound is a non-hardening butyl rubber extruded tape sealant. It will remain flexible and develop an immediate and permanent bond to a wide range of metal, concrete, glass and most plastics substrates.

USES:

Metal
Concrete
Glass
Most plastics

FEATURES:

Meets or exceeds Industry Specifications
Good Chemical Resistance to chemicals noted
Good Cold Weather Flexibility at -10˚F
Wide Range of Application Temperature
Easy Application
100% solids, permanently flexible, no shrinkage, non-corrosive.
Resists oxidization and hardening.
No Visual Deterioration
180˚ Bend
No adhesion loss
No cracking
Service Temperature = -40˚F to 200˚F
Application Temperature = 20˚F to 120˚F
100% solids, no cure shrinkage
Watertight Joints Hydrostatic Performance – ASTM C990 Sec. 10.1 – 10 psi for 10 min.

PACKAGING:

1” x 1” x 14.5 LF/roll (6 rolls/case)
1/8” x 2” x 20 LF/roll (12 rolls/case)
1/8” x 4” x 50 LF/roll (2 rolls/case)

Ram Flash 327 HDR

Beau Kuhn — Tue, 05 May 2020 15:41:46 +0000

RamFlash 327 HDR is a 60 mil heavy-duty uncured neoprene flashing material to be used in conjunction with RamTough 250 and RamTough KLB-100. It is designed to be flexible and conform to irregular surfaces and shapes, curing in place after installation.

USES:

RamTough 250 flashing assemblies
RamTough 250 expansion joint designs
Green Roof Roofscapes®

PACKAGING:

Available in: 6″, 9″, 12″, 18″, 24″, 36″ widths.
All widths are 100 foot length rolls

Flashings & Accessories – Barrett Company

Terra-EDGE™ Boxes

Roofscape® Edge is designed as a definite boundary between gravel/paver and growth media for semi-intensive vegetated roofs that allows the flow of water but not of the substrate.

USES:

Semi-intensive vegetated roofs

FEATURES:

Utilizes a “smooth slide” design to make secure, invisible connections

Has prefabricated corners for ease of installation.

Prevents overly moist media conditions around the perimeter or in transition areas of the roof, thus preventing anaerobic growing conditions.

Neoprene Pipe Boots

*Adapters available for round, square tube, and angle iron available to fit most pipe boots.

MEDIUM BOOTS = 1″, 2″, 3″, 4″, 5″, 6″ pipes

LARGE BOOTS = 8″, 9″, 10″, 11″, 12″ pipes

FEATURES & BENEFITS:

• Neoprene formulation is ideally suited for use with hot applied rubberized asphalt.

• No special tools are needed for installation

• Each boot can be adapted to several pipe sizes

• Years of field experience assure proven performance

• Ease of installation keep installation cost low

• Boots that fit various size pipes makes ordering and inventory easier

PACKAGING:

Packaging and shipping based on customer requirements.

Squeegees

Wood & Steel-Handled Squeegees

SIZES:

6″ (Steel-Handled)

10″ (Steel-Handled)

12″ (Steel-Handled)

10″ (Wood-Handled)

18″ (Wood-Handled)

TB 50

TB 50 is a channel termination bar used for edge or vertical parapet wall terminations. Each TB 50 termination bar is 1″ wide and 10′ long and is compatible with all flashings.

DIMENSIONS:

– 26 ga. x 1”x 10’ long

– 1/4” holes spaced 8” on center

AVAILABLE FINISHES:

– Type 304 stainless steel

– Aluminum

TB 75

TB 75 is a termination bar used at top of flashing to secure it to the backup. Additionally, it has a 3/8″ flange on top for easy caulking. TB 75 is compatible with all flashings.

DIMENSIONS:

– 26 ga. x 1-1/2”x 8’ long

– 1/4” holes spaced 8” on center

– 3/8” flange on top for easy caulking

AVAILABLE FINISHES:

– Type 304 stainless steel

– Aluminum

TB 125

TB 125 is a flat termination bar used at top of flashing to secure it to the backup. TB 125 is compatible with all flashings.

DIMENSIONS:

– 1/8” x 1” x 8’ long

– 1/4” holes spaced 8” on center

AVAILABLE FINISHES:

– Type 304 stainless steel

– Aluminum

Black Pearl® Butyl Tape

Black Pearl ® Butyl Tape compound is a non-hardening butyl rubber extruded tape sealant. It will remain flexible and develop an immediate and permanent bond to a wide range of metal, concrete, glass and most plastics substrates.

USES:

Metal

Concrete

Glass

Most plastics

FEATURES:

Meets or exceeds Industry Specifications

Good Chemical Resistance to chemicals noted

Good Cold Weather Flexibility at -10˚F

Wide Range of Application Temperature

Easy Application

100% solids, permanently flexible, no shrinkage, non-corrosive.

Resists oxidization and hardening.

No Visual Deterioration

180˚ Bend

No adhesion loss

No cracking

Service Temperature = -40˚F to 200˚F

Application Temperature = 20˚F to 120˚F

100% solids, no cure shrinkage

Watertight Joints Hydrostatic Performance – ASTM C990 Sec. 10.1 – 10 psi for 10 min.

PACKAGING:

1” x 1” x 14.5 LF/roll (6 rolls/case)